Communication-Specific Accessories; Service-Specific Accessories - Endress+Hauser Levelflex FMP51 Operating Instructions Manual

Accessories
Accessory Description
Remote display FHX50
• Material:
• Suitable for the display modules:
• Connection cable:
102
– Plastics PBT
– 316L (in preparation)
– SD02 (push buttons)
– SD03 (touch control) (in preparation)
– Cable with M12 plug; supplied with the FHX50; up to 30 m (98 ft)
– Customer supplied standard cable; up to 60 m (196 ft)
• If the remote display is to be used, the Levelflex must be ordered in the version "Prepared for display FHX50" (feature
030, option L or M). For the FHX50, on the other hand, the option A: "Prepared for display FHX50" has to be selected in
feature 050: "Option Measurement Device".
• If a Levelflex has not been ordered in the version "Prepared for display FHX50", but is nevertheless to be equipped with an
FHX50, it is essential to select the option B: "Not prepared for display FHX50" in feature 050: "Option Measurement
Device" of the FHX50. In this case, a retrofit kit, needed to prepare the Levelflex for the remote display, is supplied
together with the FHX50.
For details refer to the document SD01007F.
14.2

Communication-specific accessories

Accessory
Commubox FXA291
14.3

Service-specific accessories

Accessory
FieldCare
Description
Connects Endress+Hauser field devices with CDI interface (= Endress+Hauser Common
Data Interface) to the USB interface of a computer.
For details refer to Technical Information TI405C/07
Description
Endress+Hauser's FDT-based Plant Asset Management tool.
Helps to configure and maintain all field devices of your plant. By supplying status
information it also supports the diagnosis of the devices.
For details refer to Operating Instructions BA027S/04 and BA059S/04
Levelflex FMP51, FMP52, FMP54
Endress+Hauser
A0019128