Endress+Hauser Levelflex FMP51 Operating Instructions Manual page 119

Levelflex FMP51, FMP52, FMP54
DC value
Navigation
Conditions
Description
Input range
Factory setting
Additional information
Medium group
Navigation
Condition
Description
Selection
Factory setting
Empty calibration
Navigation
Endress+Hauser
Setup ® DC value
Only visible for devices with "Interface measurement" application package (Product structure:
Feature 540 "Application package", option EB "Interface measurement")
Defines the relative dielectric constant e
upper phase (DC ).
1
0 to 20
1.9
Dielectric constants of important media commonly used in the industry are summarized in the
document SD106F, which can be downloaded from the Endress+Hauser web page
(www.endress.com).
Setup ® Medium group
Only visible for "Operating mode" = "Level".
Defines the medium group of the measured product.
• Water bsed DC > 4
• Others DC ³ 1.9
Others DC ³ 1.9
Setup ® Empty calibration
Description of device parameters (operating menu)
of the
r
DC
1
DC
1
A0013181
119