The "Event Logbook" Submenu - Endress+Hauser Levelflex FMP51 Operating Instructions Manual

Levelflex FMP51, FMP52, FMP54
Filter options
Navigation
Description
Options
Factory setting
Event list
Navigation
Description
User interface
Endress+Hauser
18.3.2

The "Event logbook" submenu

Diagnostics ® Event logbook ® Filter options
Use this function to select the category (status signal) whose event messages are displayed in the
events list.
The status signals are categorized according to NAMUR NE 107: F = failure, M =
maintenance request, C = function check, S = out of specification
• All
• Failure (F)
• Maintenance required (M)
• Function check (C)
• Out of specification (S)
• Information (I)
All
Diagnostics ® Event logbook ® Event list
Use this function to display the history of event messages of the category selected in the Filter
options parameter (® ä 173). A maximum of 20 event messages are displayed in chronological
order. If the advanced HistoROM function is enabled in the device, the event list can contain up
to 100 entries.
The following symbols indicate whether an event has occurred or has ended (status symbols):
• : Event has occurred
• : Event has ended
Information on what is causing the message, and remedy measures, can be viewed via the
symbol on the display.
• For event messages in category I (status signal): status signal, event number, time event
occurred, event text
• For event messages in category F, M, C, S (status signal): diagnostics event, status symbol, time
event occurred, event text
Description of device parameters (operating menu)
173