Endress+Hauser Levelflex FMP51 Operating Instructions Manual page 165

Levelflex FMP51, FMP52, FMP54
Description
Selection
Factory setting
Display interval
Display damping
Navigation
Description
Input range
Factory setting
Header
Navigation
Description
Options
Factory setting
Endress+Hauser
Use this function to specify the number of decimal places for measured value 4. This setting does
not affect the measuring or computational accuracy of the device. The arrow displayed between
the measured value and the unit indicates that the device computes with more digits than are
shown on the local display.
• x
• x.x
• x.xx
• x.xxx
• x.xxxx
x.xx
(® ä 116)
Setup ® Advanced setup ® Display ® Display damping
Use this function to set the reaction time of the local display to fluctuations in the measured value
caused by process conditions. A time constant is entered for this purpose: if a low time constant is
entered, the display reacts very quickly to fluctuating measured variables. If a high time constant
is entered, the display reaction is damped.
0 to 999 s
0 s
Setup ® Advanced setup ® Display ® Header
Use this function to select the contents of the header of the local display. The header text only
appears during normal operation.
1
1 Position of the header text on the display
• Device tag
• Free text
Device tag
Description of device parameters (operating menu)
XXXXXXXXX
A0013375
165