Endress+Hauser Levelflex FMP51 Operating Instructions Manual page 131

Levelflex FMP51, FMP52, FMP54
Additional information
Level correction
Navigation
Description
Input range
Factory setting
Additional information
Endress+Hauser
No echos are evaluated within the blocking
distance UB. Therefore, UB can be used to
suppress interference echos within the upper end
of the probe.
Setup ® Advanced setup ® Level ® Level correction
Defines a level correction
Depending on the selected level unit:
• -100,0 to 100,0 %
• -200,0 to +200,0 m
• -656,2 to +656,2 ft
• -7874,0 to +7874,0 inch
• -200.000,0 to +200.000,0 mm
0%
The value specified in this parameter is added to the measured level (before linearization).
Description of device parameters (operating menu)
UB
A0013219
131