Endress+Hauser Levelflex FMP51 Operating Instructions Manual page 156

Description of device parameters (operating menu)
Additional information
Set point value
Navigation
Description
Range of values
Factory setting
Set point status
Navigation
Description
Range of values
Factory setting
Fail safe time
Navigation
Description
Range of values
Factory setting
156
The hexadecimal code give more detailed information on the device state than the Out status
parameter.
For the meaning of the hexadecimal code refer to BA00034S, "PROFIBUS DP/PA - Guidelines for
planning and commissioning".
"Analog output 1" ... "Analog output 4" submenus
The Analog output 1 to Analog oputput 4 submenus are used to configure the AO blocks of
the device.
Setup ® Advanced setup ® Analog output 1...4 ® Set point value
Enter the set point for the AO block.
Any IEEE floating point number:
-3,4 10 38 ... +3,4 10 38
0
Setup ® Advanced setup ® Analog output 1...4 ® Set point status
Enter the status byte for the set point of the AO block.
0 to 255
0
Setup ® Advanced setup ® Analog output 1...4 ® Fail safe time
Defines the fail-safe time, i.e. the time which passes after the occurrence of an error until the AO
block assumes the defined error state.
Any positive IEEE floating point number:
0 to 3.4 10 38 s
0 s
Levelflex FMP51, FMP52, FMP54
Endress+Hauser