Endress+Hauser Levelflex FMP51 Operating Instructions Manual page 147

Levelflex FMP51, FMP52, FMP54
Description
Options
Factory setting
Assign limit
Navigation
Prerequisite
Description
Options
Factory setting
Assign diagnostic level
Navigation
Prerequisite
Description
Options
Factory setting
Endress+Hauser
Allocates a DI block to the switch output.
• Off
No digital block is allocated.
• Digital output 1
• Digital output 2
• Digital output 3
• Digital output 4
Off
Setup ® Advanced setup ® Switch output ® Assign limit
Only visible for Switch output function = Limit.
Defines the variable to be checked for limit transgression and allocates it to the switch output.
• Off
No measured variable is allocated.
• Level linearized
• Distance
• Interface linearized
• Interface distance
• Upper interface thickness
• Terminal voltage
• Electronic temperature
• Relative echo amplitude
• Relative interface amplitude
Off
Setup ® Advanced setup ® Switch output ® Assign diagnostic level
Only visible for Switch output function = Event level.
Defines to which class of diagnostic events the output reacts.
• Alarm
• Alarm + warning
• Warning
Alarm
Description of device parameters (operating menu)
147