Endress+Hauser Levelflex FMP51 Operating Instructions Manual page 133

Levelflex FMP51, FMP52, FMP54
Factory setting
Additional information
Level unit
Navigation
Description
Options
Factory setting
Additional information
Blocking distance
Navigation
Desription
Input range
Factory setting
Endress+Hauser
80 (Dielelectric constant of water at 20 °C / 68 °F)
Dielectric constants of important media commonly used in the industry are summarized in
the document SD106F, which can be downloaded from the Endress+Hauser web page
(www.endress.com).
Setup ® Advanced setup ® Interface ® Level unit
Defines the level unit
• %
• m
• mm
• ft
• in
%
The level unit may differ from the distance unit as defined in the Distance unit parameter
(® ä 116):
• The distance unit is used for the basic calibration ("Empty calibration" and "Full calibration").
• The level unit is used to display the (unlinearized) level.
Setup ® Advanced setup ® Interface ® Blocking dist.
Setup ® Advancede setup ® Safety settings ® Blocking dist.
Defines the upper blocking distance, UB
0 to 200 mm (0 to 7.8 in)
0 m (0 ft)
Description of device parameters (operating menu)
133