Other Topics; If You Have A Problem - Agilent Technologies 4339B User Manual

Other Topics

For details on these functions, see the
Initial Inspection | Chapter 1 of the
Auto-O set Canceling | Chapter 2 and Chapter 3 of the
Key Lock Function | Chapter 2 and Chapter 3 of the
GPIB | Chapter 4 and Chapter 5 of the
Handler Interface | Chapter 3 and Appendix B of the
Save / Recall | Chapter 2 and Chapter 3 of the
Backup Function | Chapter 3 of the
Speci cation | Chapter 8 of the
Maintenance | Chapter 9 of the
Error Messages | \Error Messages" in back of the

If You Have a Problem

If any of the problems listed below occur, follow the instructions given for the problem.
If you nd yourself lost when operating the 4339B
You can get back on track by:
To return to the measurement mode Press
To return to the default settings
If the 4339B does not accept key input:
Check whether or not the Key Lock annunciator(
Press
unlocked.
Check that the 16064B LED display/trigger box is connected to the 4339B and it is set to
lock out the keys. If so, unlock the keys from the 16064B.
If is not accepted:
Check whether the interlock connector is rmly connected.
If you are using the 16008B or the 16339A,
Check whether the top cover of the test xture is closed.
If or \OVLD" is displayed:
------
The measurement result is out of the measurable range. Check the DUT and make sure the
measurement range is properly set.
2-20 Operating the 4339B
4339B Operation Manual
Operation Manual
Operation Manual
Operation Manual
Operation Manual
Operation Manual
select it and press
Press
If the reset is not accepted, con rm that the Key
Lock annunciator(
. The Key Lock annunciator(
.
Operation Manual
Operation Manual
Operation Manual
Operation Manual
Operation Manual
several times. When
.
. Select
Yes
) is turned ON. See next.
9
) is ON. If so:
9
) turns OFF and the front-panel keys are
9
4339B
is in the menu,
Exit
and press .