Network Ip Address Configuration - GE Voluson 730 Service Manual

GE M S - K
EDICAL YSTEMS
D 105844, R
IRECTION EVISION
Section 3-8

Network IP Address Configuration

NOTE: Following Information must be provided by customer or hospital engineer before you can start:
A Station name, AE Title, IP address and Port Number for the Voluson® 730.
The IP addresses for the default gateway and other routers at the site for ROUTING
INFORMATION. Only if necessary (e.g. for Internet access).
1.) Touch the UTILITIES key on the Touch Panel once to display the Utilities menu.
2.) Select SYSTEM SETUP and open the
3.) Click the NETWORK CONFIG button, read the message and afterwards confirm with YES.
4.) The "Internet Protocol (TCP/IP) Properties" dialog page appears.
To specify a DICOM Address, follow the instructions of described in the Basic User Manual,
Chapter 17.3.8 of the Voluson® 730.
U
RETZTECHNIK LTRASOUND
1
Figure 3-39 Network Configuration
Figure 3-40 Internet Protocol (TCP/IP)
Chapter 3 Installation
page on the System Setup desktop screen.
DICOM
click Network Config button, read message
and afterwards confirm with Yes
You can get IP settings assigned automatically if
your network supports this capability.
You need to ask your network administrator for
the appropriate settings.
Type in:
• IP address
• Subnet mask
• Default gateway
NOTE: This example shows fictive numbers!
V ® 730 S
OLUSON ERVICE
M
ANUAL
3-37