Tcp/Ip Configuration; Dataflow - GE Vivid S70 User Manual

Configuration of the Patient, Worklist and Examination list in the Archive
screen
NOTE:

TCP/IP configuration

Dataflow

Dataflow adjustments
–
Vivid S70 / S60 User Manual
BC092760-1EN 01
1. In the List type drop-down menu, select the list to edit.
2. To add a column to the list:
• Select a column to display in the Available columns field
and press
• Press /
3. To remove a column from the list:
• Select the column to remove in the Show columns field
and press
The columns First name, Last name, Patient ID, Last
exam and Exam date cannot be removed for the lists.
To be able to use the network functions when connected to a
hospital network, the system must have a proper network
address. See 'System's TCP/IP settings' on page 12-42 for
more information.
Communication between the Vivid S70 / S60 and other
information providers on the network takes the form of
dataflows. Each dataflow defines the transfer of patient
information and images from an input source to the system, and
from the system to one or several output sources. Input/output
devices cannot be added/removed to/from the pre-defined
dataflows. However the settings for the devices can be adjusted.
See 'Dataflows available' on page 10-3 for a complete list and
description of dataflows available.
1. Press Utility/Config on the Touch panel and log on as
administrator if required.
2. Select the Connectivity category and Dataflow subgroup.
The Dataflow sheet is displayed.
to add it to the list.
to move the column.
.
Archive
12-65