Installation; Preparing For The Installation; Ac Power Line; Location Considerations - Avery Dennison SNAP 500 User Manual

10

2.0 Installation

2.1 Preparing for the installation

2.1.1 AC Power Line

2.1.2 Location Considerations

All manuals and user guides at all-guides.com
NOTE: AVERY DENNISON requires that the minimum
electrical service be 10 Amps @ 115VAC or 6 Amps @
230VAC. This will allow the AVERY DENNISON SNAP 500
printer, PC, and any additional support or service
equipment to be plugged into the same service. It is
highly recommended that the printer and its accessories
be on a dedicated circuit.
The electrical service supplying power to the AVERY DENNISON SNAP 500
printer or to peripheral equipment connected to the AVERY DENNISON SNAP
500 printer should meet standard electrical code practices, including proper
grounding and neutrals.
The printer weighs 45 pounds (20.5 Kg) and requires a table of sufficient quality
and strength to handle this load. The AVERY DENNISON SNAP 500 printer
requires an area with the approximate dimensions of 72" wide x 30" deep x 32"
high (1.8 m x 76 cm x 81 cm). The host PC (if used) and any printer options will
increase the required area. AVERY DENNISON recommends using an industrial
type worktable. Refer to Figure 1 below.
The AVERY DENNISON SNAP 500 printer is designed for easy operator
accessibility to the printer controls and components. Select your AVERY
DENNISON SNAP 500 printer's location to meet the following criteria:
1. Choose an area that maintains optimum flow of your product and allows for
the operator's comfort. Consider the physical demands being placed on the
operator with respect to height of the table on which the printer will be
placed, the amount of space around the printer, and the operator's
accessibility to the printer. Refer to Figure 1.
2. While AVERY DENNISON has designed the printer to be reasonably quiet,
select an area where repetitious noise from printing and cutting processes is
acceptable.
CAUTION: It is each customer's responsibility to make
sure that the workstation created for the AVERY
DENNISON SNAP 500 printer meets the recommended
requirements to ensure optimal operation of the printer.
User's Manual—SNAP™ 500 Printer