Table of Contents
Advertisement
Get started with Connect IT 16/48
3. Connect the second power supply and fan unit to the Connect IT.
a. Orient the second power supply and fan unit to match the picture shown above.
b. Insert the unit into the slot on the right side of the device.
c. Turn the red or blue screws to securely attach the unit to the device case.
4. Connect the stand-alone fan unit to the Connect IT.
a. Orient the fan unit to match the picture shown above.
b. Insert the fan into the slot next to the power supply and fan unit on the right side of
c. Turn the red or blue screws to securely attach the fan to the device case.
Optional: Connect SFP+ modules
You can choose to connect up to two SFP+ modules to the Connect IT.
Note
When you use an SFP+ module, you cannot use the equivalent Ethernet port. For example, if you
insert an SFP+ module into the SFP+1 slot, you cannot use the ETH1 slot. If you insert an SFP+ module
into the SFP+2 slot, you cannot use the ETH2 slot.
1. Orient the device so the front of the device is facing you.
2. Insert the first SFP+ module into the SFP+1 slot on the Connect IT.
3. Insert the second SFP+ module into the SFP+2 slot on the Connect IT.
Connect the hardware
These sections explain how to connect the hardware and then connect to either a cellular network
using the CORE module or to a site network using an Ethernet cable.
Connect hardware and connect to site network using an Ethernet LAN
n
Connect hardware and connect to a cellular network
n
Connect hardware and connect to site network using an Ethernet
LAN
This section explains how to connect the Connect IT hardware and then connect to a site network,
using an Ethernet WAN cable.
Prerequisites
CAT 5/6 Ethernet cable, which must be purchased separately.
n
To connect the hardware and connect to a site network:
1. Connect the power supply and fan units to the device. See
fans.
2. Plug the power supply unit into an AC power outlet and connect the other end to the Power
plug on the 16/48.
3. Connect one end of an Ethernet cable to your site network.
Digi Connect IT® 16/48 User Guide
the device.
Optional: Connect SFP+ modules
Connect the power supplies and
12
Advertisement
Table of Contents
