Connectport Lts Features; Connectport Lts Family; User Interfaces; Hardware And Network Interface Features - Digi ConnectPort LTS Series User Manual

ConnectPort LTS features

This section provides an overview of ConnectPort LTS features.

ConnectPort LTS Family

ConnectPort LTS (Linux Terminal Server) devices provide serial over Ethernet connectivity for
applications. They support IPv4 and IPv6 Ethernet protocols. ConnectPort LTS MEI is the same size as
ConnectPort LTS (RS-232 only version).

User interfaces

You can use the following user interfaces to configure, monitor, and administer Digi devices:
Web-based interface
n
Command-line interface available via local serial port, telnet or SSH
n
Simple Network Management Protocol (SNMP)
n
LCD panel
n
For additional details on these user interfaces, see
administration. You can customize some of the user interfaces.

Hardware and network interface features

For detailed hardware specifications and network interface information, go to:
www.digi.com/products/serial-servers/serial-device-
servers/connectportlts#specifications
See also the datasheet for your Digi device.

Network services

You can enable or disable access to network services. This means that you can restrict a device's use
of network services to those strictly needed by the device. To improve device security, you can disable
non-secure services. You can enable or disable the following network services:
Advanced Digi Discovery Protocol (ADDP)
n
RealPort
n
Encrypted RealPort
n
HTTP/HTTPS
n
Digi ConnectPort LTS User Guide
Overview: Configuration, monitoring, and
12