Multi-User Model - Digi ConnectPort LTS8 Command Reference Manual

User permissions in ConnectPort LTS products
The user model in a ConnectPort LTS product influences the commands that users can issue.
ConnectPort LTS supports multiple users.

Multi-user model

User 1 has a default name of "root." This user is also known as the administrative user.
n
User 1 has default permissions that enables the user to issue all commands.
n
Permissions for User 1 can be changed to be less than the default root permissions.
n
Additional users may be defined as needed. The "set group" command defines user groups (see
n
"set group").
Increasing security for device users
As needed, you can enforce additional security for device users. For example, you can use the
autoconnect feature, where a user is automatically connected to another system without accessing
the ConnectPort LTS product's command line. See the "set autoconnect" command on page 57.
ConnectPort® LTS Command Reference 14