Get started with Connect IT 16/48
This section explains what comes with each Connect IT model, how to install the necessary software,
and how to connect the hardware.
1.
Verify product
2.
Cellular ONLY: Insert the CORE
3.
Connect the power supplies and
4.
Optional: Connect SFP+
5.
Connect the hardware to a
6. Access the device from the
7. Update the firmware on the Connect IT from the
8.
Change the
9. Administrators only: Additional configuration to the Connect IT can be done in Remote Manager
or in the Connect IT's web user interface.
Configure Connect IT using Remote Manager
n
Configure Connect IT using the web user interface
n
10.
Mount
the Connect IT to a rack.
11.
Connect equipment to the Connect IT serial
Digi Connect IT® 16/48 User Guide
components.
module.
fans.
modules.
network.
web
UI.
password.
web
UI.
ports.
7