Get Started With Connect It 4 - Digi Connect IT 4 User Manual

Get started with Connect IT 4

This section explains what comes with each Connect IT model, how to install the necessary software,
and how to connect the hardware.
1. Verify product
2. Cellular ONLY: Insert the CORE
3. Connect the hardware to a
4. Access the device from the
5. Update the firmware on the Connect IT from the
6. Change the password from the web
7. Administrators only: Additional configuration to the Connect IT can be done in Remote Manager
or in the Connect IT's web user interface.
Configure Connect IT using Remote Manager
n
Configure Connect IT using the web user interface
n
8. Connect equipment to the Connect IT serial
Digi Connect IT® 4 User Guide
components.
module.
network.
web UI.
UI.
web UI.
ports.
7