Get Started With Connect It 16/48 - Digi Connect IT 16 User Manual

Get started with Connect IT 16/48

This section explains what comes with each Connect IT model, how to install the necessary software,
and how to connect the hardware.
1. Verify product
2. Cellular ONLY: Insert the CORE
3. Connect the power supplies and
4. Optional: Connect SFP+
5. Connect the hardware to a
6. Access the device from the
7. Update the firmware on the Connect IT from the
8. Change the
9. Administrators only: Additional configuration to the Connect IT can be done in Remote Manager
or in the Connect IT's local web user interface. See
10. Mount the Connect IT to a rack.
11. Connect equipment to the Connect IT serial
Digi Connect IT® 16/48 User Guide
components.
module.
fans.
modules.
network.
web UI.
password.
web UI.
Configure the Connect IT
ports.
16/48.
7