Configuring Network And Serial Port Settings; Chapter 3 Configuring Network And Serial Port Settings; Assumptions; Network Settings - Digi TS 4 MEI User Manual

Chapter 3

Assumptions

Network Settings

Chapter 3

Configuring Network and Serial Port Settings

C o n f i g u r i n g N e t w o r k a n d S e r i a l P o r t
The next step in the device setup process is to configure the network and
serial port settings, using the Web user interface for your Digi product.
To access the web interface, an IP address must be assigned to your Digi
product, as described in Chapter 2, "Configuring the IP Address". This
chapter assumes that you have logged onto the web interface using the
username, root, and password, dbps, in order to make any changes or
additional configuration assignments. However, it is important to note that if
you have used the Digi Device Setup Wizard, your configuration is
complete and you do not need to make additional changes.
1. Click Network to view the IP settings or make any changes to the IP
address.
2. In the Name Server box, enter the IP address for the DNS server. The
DNS server maps names (example: MyDeviceName.mycompany.com)
to IP addresses (example:192.105.1.2).
3. Enter the domain name that this device will live in that is tied to the DNS
server address assigned in step 2. This name can be used by other
network devices to talk to it, instead of using the its IP address. Get this
name from the network administrator, because it must be entered in the
DNS server to work properly.
Assumptions
S e t t i n g s
25