Table of Contents
Advertisement
Configure Connect IT using the web user interface
Configure connection to Remote Manager from the web UI
You can configure the settings for connection to Remote Manager in the Connect IT web UI.
1.
Log in to the Connect IT web
2. Click Configuration in the left pane.
3. Expand the Central management section.
a. Select the Enable central management option to enable Connect IT to connect to
b. From the Service list box, select the Digi Remote Manager option.
c. In the Management server field, enter the URL for Remote Manager.
d. In the Retry interval field, enter the interval at which Connect IT should attempt to
e. In the Keep-alive interval field, specify how often to send keep-alive messages
4. Click Save.
5. Disconnect the Ethernet cable from the Connect IT and your PC.
Update modem firmware
You can update the modem firmware on the Connect IT. Before you begin, you must download the
desired version of the modem firmware onto your PC.
1.
Download the Connect IT firmware to your
2.
Log in to the Connect IT web
3. Select the System tab in the left pane.
4. Scroll down to the Modem Firmware section.
5. Click Choose File.
6. Browse for and select the modem firmware file downloaded to your PC.
7. Click Upload & Install Firmware.
Configure a serial port
You can configure the connection, determine if changes are monitored, and enable a TCP, Telnet, or
SSH connection for each serial port. Each port must be individually configured.
Configure the connection settings for a serial port
You can configure the serial ports on the Connect IT. Each port must be configured individually.
1.
Log in to the Connect IT web
2. Click Configuration in the left pane.
Digi Connect IT® 16/48 User Guide
UI.
Remote Manager.
connect to Remote manger, after a disconnect. The time is measured in seconds.
when using a non-cellular interface.
UI.
UI.
Configure connection to Remote Manager from the web UI
PC.
31
Advertisement
Table of Contents
