Advanced Analog Output Channel; Legend Of Advanced Analog Output Channel - Lightware MMX8x4-HT Series User Manual


  
5. Software Control – Lightware Device Controller
5.7.12. Advanced Analog Output Channel
This settings refers to the balanced analog output port.
w
1
q
9
8
5.7.13. Legend of Advanced Analog Output Channel
Channel name
1
2 3
Mono button
2
4
Phase invert
3
button
Preset button
4
5
Delay button
5
EQ section:
6
HIGH, HMID,
LMID, LOW
Factory defaults
7
restore button
Output volume
8
fader
Signal indicator
9
chart
6
Mute/Unmute
q
Balance section
w
7
MMX8x4-HT series – User's Manual
Displays the channel name. All the settings below
belongs to the channel.
The same audio is transmitted to both left and right
channel.
It inverts the phase of the input signal.
Clicking on this button opens a Channel Preset window
where the channel presets can be saved, loaded or
deleted. For more details see Channel Presets section.
This feature makes possible to add delay (ms) into
the audio output to avoid echo effects in larger rooms.
Max. value: 25ms, steps 1ms.
The equalizer section is for set the proper rate of the
different frequencies (high: 8kHz; high-mid: 1.6 kHz,
low-mid: 400 Hz, low: 100Hz). See more details in
Equalization (EQ) Settings section.
Restore the factory default settings on the microphone
channel. For more details see Factory Default Settings.
Sets the volume of the output signal between -80dB
and +10dB. It also can be controlled by scrolling or
writing the value in the text field.
See more details in Panorama or Balance Settings
section.
Mutes/unmutes the output.
Balance can be set in this section. For more details,
see Panorama or Balance Settings.
51