Advanced Analog Output Channel; Legend Of Advanced Analog Output Channel - Lightware MMX8x4-HT Series User Manual


  
5. Software Control – Lightware Device Controller
6.7.13. Advanced Analog Output Channel
This settings refers to the balanced analog output port.
w
q
9
8
1 2 3
4
5
6
7
Applied firmware package: v1.2.2b5 | LDC software: v2.2.1
MMX8x4-HT series – User's Manual
6.7.14. Legend of Advanced Analog Output Channel
Channel name Displays the channel name. All the settings below belongs to the channel.
1
Mono button The same audio is transmitted to both left and right channel.
2
Phase invert It inverts the phase of the input signal.
3
button
Preset button Clicking on this button opens a Channel Preset window where the channel presets can be
4
saved, loaded or deleted. For more details see
Delay button This feature makes possible to add delay (ms) into the audio output to avoid echo effects in
5
larger rooms. Max. value: 25ms, steps 1ms.
EQ section: The equalizer section is for set the proper rate of the different frequencies (high: 8kHz; high-
6
HIGH, HMID, mid: 1.6 kHz, low-mid: 400 Hz, low: 100Hz). See more details in
LMID, LOW section.
Factory defaults Restore the factory default settings on the microphone channel. For more details see
7
restore button Default Settings.
Output volume Sets the volume of the output signal between -80dB and +10dB. It also can be controlled by
8
fader scrolling or writing the value in the text field.
Signal indicator See more details in
9
chart
Mute/Unmute Mutes/unmutes the output.
q
Balance section Balance can be set in this section. For more details, see
w
#analogaudio #balance volume #advancedaudio
Channel Presets section.
Equalization (EQ) Settings
Panorama or Balance Settings section.
Panorama or Balance
70
Factory
Settings.