Query The Status Of Destination Port; Query The Video Autoselect Settings; Change The Autoselect Mode; Query The Input Port Priority - Lightware MMX8x4-HT Series User Manual


  
8. LW3 Programmers' Reference
8.5.12. Query the Status of Destination Port
Command and Response
Ý GET•/MEDIA/XP/VIDEO.DestinationPortStatus
pr•/MEDIA/XP/VIDEO.DestinationPortStatus=<out1_state>;<out2_state>;<...>;<out#_state>
Ü
Parameters
<out#_state> The responses contain one letter and a 1-byte long HEX code showing the current state of the
output ports. See the Legend in
INFO: The response depends on the number of the output ports. MMX8x4-HT400MC and MMX8x4-HT420M
models have 4 output ports, MMX8x8-HDMI-4K-A model has 8 output ports.
Example
Ý GET /MEDIA/VIDEO/XP.DestinationPortStatus
Ü pr /MEDIA/VIDEO/XP.DestionationPortStatus=L00AA;T00AE;T00AF;T00AA;T00AB
INFO: Output 5 in MMX8x4-HT400MC and MMX8x4-HT420M models means the advanced analog audio output.
8.5.13. Query the Video Autoselect Settings
Command and Response
Ý GET•/MEDIA/VIDEO/XP.DestinationPortAutoselect
pr•/MEDIA/VIDEO/XP.DestinationPortAutoselect=<out1_set>;<out2_set>;<...>;<out#_set>
Ü
The response shows the settings of each output one by one.
Parameters
Identifier Parameter description
<out#_set> Two-letter code of the
Autoselect settings
Example
Ý GET /MEDIA/VIDEO/XP.DestinationPortAutoselect
Ü pr /MEDIA/VIDEO/XP.DestinationPortAutoselect=DP;EP;EF;DP;DP
DP: the autoselect is Disabled on output 1, output 4, and output 5.
EP: the Autoselect is Enabled on output 2 (selected mode is Priority detect).
EF: the Autoselect is Enabled on output 3 (selected mode is First detect).
INFO: For more information see
Query the Status of Source Port section.
Parameter values
1 letter E: Autoselect is enabled
st
D: Autoselect is disabled
2 letter F: First detect mode: the first active video input is selected.
nd
P: Priority detect: always the highest priority active video
input will be selected.
L: Last detect: always the last attached input is switched to
the output automatically.
The Autoselect Feature section.
MMX8x4-HT series – User's Manual
INFO: Output 5 in MMX8x4-HT400MC and MMX8x4-HT420M models means the advanced analog audio output.
8.5.14. Change the Autoselect Mode
Command and
Ý CALL•/MEDIA/VIDEO/XP:setDestinationPortAutoselect(<out>:<out_set>)
Ü mO•/MEDIA/VIDEO/XP:setDestinationPortAutoselect
Parameters
See the previous section.
Example
Ý CALL /MEDIA/VIDEO/XP:setDestinationPortAutoselect(O1:EF)
Ü mO /MEDIA/VIDEO/XP:setDestinationPortAutoselect
The Autoselect mode is Enabled on Output 1 in First detect mode.
INFO: Output 5 in MMX8x4-HT400MC and MMX8x4-HT420M models means the advanced analog audio
output.
8.5.15. Query the Input Port Priority
Command and Response
Ý GET•/MEDIA/VIDEO/XP.PortPriorityList
pr•/MEDIA/VIDEO/XP.PortPrioirtyList=<out1_list>;<out2_list>;<...>;<out#_list>
Ü
The response shows the priority of each output one after another. The priority number can be from 0 to 31; 0 is the
highest- and 30 is the lowest priority. 31 means that the port will be skipped from the priority list.
Parameters
<out_list>
Example
Ý GET /MEDIA/VIDEO/XP.PortPriorityList
Ü /MEDIA/VIDEO/XP.PortPriorityList=7,6,5,4,3,2,1,0;0,1,2,3,4,5,6,7;0,1,2,3,4,5,6,7;0,1,2,3,4,5,6,7;0,1,2,3,4,5,6,7
There are five outputs, so there are five groups listed in the response (divided by semicolons) and each group (list)
contains eight priority numbers.
The response: 7,6,5,4,3,2,1,0;0,1,2,3,4,5,6,7;0,1,2,3,4,5,6,7;0,1,2,3,4,5,6,7;0,1,2,3,4,5,6,7.
Those values show the priority order of the video input ports:
I1 I2
7 6
I1 I2
0 1
Applied firmware package: v1.2.2b5 | LDC software: v2.2.1
Response #autoselect
The input port priority order of the given output port: <in1>,<in2>,<...>,<in>
Output 1 Output 2
I3 I4 I5 I6 I7 I8 I1 I2 I3 I4 I5 I6
5 4 3 2 1 0 0 1 2 3 4 5
Output 3 Output 5
I3 I4 I5 I6 I7 I8 I1 I2 I3 I4 I5 I6
2 3 4 5 6 7 0 1 2 3 4 5
103
Output 3
I7 I8 I1 I2 I3 I4 I5 I6 I7 I8
6 7 0 1 2 3 4 5 6 7
I7 I8
6 7