The Rear Panel At A Glance - Agilent Technologies E4418B User Manual

Getting Started

The Rear Panel at a Glance

The Rear Panel at a Glance
1
9 8
1. Channel A (Option 002 or 003 only)
2. Power Ref (Option 003 only)
The power reference output is a 50 Ω type N connector. The output signal is
used for calibrating the sensor meter combination.
3. Recorder Output
This output produces a dc voltage that corresponds to the power level of the
channel input. Refer to "Recorder Output", on page 2-59 for further
information.
4. Power socket
This power meter has an auto configuring power supply. This allows it to
operate over a range of voltages without manually being set to a certain
voltage.
5. Fuse
An F3.15AH fuse is installed for all voltage supplies.
6. GP-IB
This connector allows the power meter to be controlled remotely using the
General Purpose Interface Bus.
7. RS232/422
This connector allows the power meter to be controlled remotely using either
the RS232 or RS422 serial interface standards.
1-16
2 3
N279
7 6
Agilent E4418B User's Guide
4
5
10