Ethernet Connector - Mitsubishi Electric FR-E700 Instruction Manual

System configuration for Ethernet communication (FR-E700 SC ENE)
3.7.2

Ethernet connector

● Ethernet communication specifications
Item
Categorie
Data transmission speed
Transmission method
Maximum segment length
Number of cascade connection stages
Interface
Number of interfaces available
IP version
Tab. 3-17: Ethernet communication specifications of FR-E700 SC ENE
Fig. 3-26: Position of the Ethernet connector
● Connection cable
Use Ethernet cables compliant with the following standards.
Communication
speed
100 Mbps
10 Mbps
Tab. 3-18: Speczfication of the Ethernet cable
STP = shielded twisted pair
UTP = unshielded twisted pair
● Hub
Use a hub that supports transmission speed of the Ethernet.
3 - 34
Description
100BASE-TX/10BASE-T
100 Mbps (100BASE-TX)/10 Mbps (10BASE-T)
Baseband
100 m between the hub and the inverter
Up to 2 (100BASE-TX) / up to 4 (10BASE-T)
RJ-45
1
IPv4
Cable
Category 5 or higher, (shielded / STP ) straight cable
Category 3 or higher, (shielded / STP ) straight cable
Category 3 or higher, (UTP ) straight cable
Wiring
Ethernet connector
FR-E700SC-ENE Ethernet connector
Connector Standard
100BASE-TX
RJ-45
connector
10BASE-T