Connection To The Pu Connector At Fr-E700 Sc Ene; Rs-485 Communication - Mitsubishi Electric FR-E700 Instruction Manual

Wiring
3.5.2

Connection to the PU connector at FR-E700 SC ENE

The PU connector can be used to connect the parameter unit (FR-PU07), enclosure surface operation
panel (FR-PA07), personal computer, etc. for the inverter operation.
Fig. 3-23: Access to the PU connector of the FR-E700 SC ENE
3.5.3

RS-485 communication

When the PU connector is connected with a personal, FA or other computer by a communication ca-
ble, a user program can run and monitor the inverter or read and write to parameters.
The protocol can be selected from Mitsubishi inverter and Modbus®-RTU. For detailed information re-
fer to section 6.19.
FR-E700 SC EC/ENE
PU connector
How to open the cover
Put a finger on top of the front
cover and pull it open.
FR-E700SC-ENE PU connector
PU connector
3 - 31