Mitsubishi Electric FR-E700 Instruction Manual page 431

Parameter
Modbus® registers
● System environment variable
Register
40002
40003
40004
40006
40007
40009
40010
40014
40015
Tab. 6-100: System environment variable
The communication parameter values are not cleared.
For write, set the data as a control input instruction. For read, data is read as an inverter operating
status.
For write, set data as the operation mode setting. For read, data is read as the operation mode
status.
FR-E700 SC EC/ENE
Definition
Inverter reset
Parameter clear
All parameter clear
Parameter clear
All parameter clear
Inverter status/control input instruction
Operation mode/inverter setting
Running frequency (RAM value)
Running frequency (E²PROM value)
Communication operation and setting
Read/Write Remarks
Write Any value can be written
Write Set H965A as a written value.
Write Set H99AA as a written value.
Write Set H5A96 as a written value.
Write Set HAA99 as a written value.
Read/write Refer to Tab. 6-101
Read/write Refer to Tab. 6-102
According to the Pr. 37 setting,
Read/write
the frequency and selectable
Write
speed are in 1 r/min increments.
6 - 277