Ethernet Connector (Ethernet Model / Safety Communication Model) - Mitsubishi Electric 800 Series Instruction Manual

2.7.2 Ethernet connector (Ethernet model / Safety
communication model)
 Ethernet communication specifications
Item
Category
Data transmission speed
Transmission method
Maximum segment length
Number of cascade connection
stages
Topology
Interface
Number of interfaces available
IP version
 Connection cable
Use Ethernet cables compliant with the following standards.
Ethernet cable
Category 5 or higher straight cable (double
shielded / STP)
• Recommended product (as of April 2019)
Model
*1
SC-E5EW series
*1 SC-E5EW cable is for in-enclosure and indoor uses. SC-E5EW-L cable is for outdoor use.
NOTE
• Depending on the cable connector shape, the cable may not be connected to the inverter.
 Hubs
Use hubs that meet the following conditions. Operation is not guaranteed if the hubs do not meet these conditions.
• Compliance with the IEEE 802.3 (100BASE-TX)
• Support of the auto MDI/MDI-X function
• Support of the auto-negotiation function
• Switching hub (layer 2 switch)
*1 A repeater hub is not available.
Industrial switching hub
Model
NZ2EHG-T8N
NZ2EHG-T8 (discontinued
product)
DT135TX
NOTE
• Do not connect the FR-PA07, FR-LU08, or any other operation panel or parameter unit to the Ethernet port. Doing so may
damage the inverter.
• For CC-Link IE TSN communication, the hubs can be used only for connection with units compliant with the authentication
class A.
62
2. Installation and Wiring
2.7 Communication connectors and terminals
100BASE-TX/10BASE-T
100 Mbps (100BASE-TX) / 10 Mbps (10BASE-T)
Baseband
100 m between the hub and the inverter
Up to 2 (100BASE-TX) / up to 4 (10BASE-T)
Line, star, or a combination of line and star
RJ-45
2
IPv4
Connector
RJ-45 connector
Manufacturer
Mitsubishi Electric System & Service
Co., Ltd.
*1
Mitsubishi Electric Corporation
Mitsubishi Electric Corporation
Mitsubishi Electric System & Service Co., Ltd.
Description
The following conditioning cables:
• IEEE 802.3 (100BASE-TX)
• ANSI/TIA/EIA-568-B (Category 5)
Manufacturer
Type