Mitsubishi Electric FR-E700 Instruction Manual page 440

Communication operation and setting
IP address (Pr. 805 to Pr. 808)
Enter the IP address of the inverter to be connected to Ethernet in Pr. 805 to Pr. 808.
(Enter the IP address assigned by the network administrator.)
Fig. 6-135: Setting of the IP address
Subnet mask (Pr. 809 to Pr. 812)
Enter the subnet mask of the network to which the inverter belongs in Pr. 809 to Pr. 812.
Fig. 6-136: Setting of the subnet mask
Default gateway address (Pr. 442 to Pr. 445)
Set the IP address of the default gateway, which is a device connecting the networks, in Pr. 442 to
Pr. 445 to establish a communication between the inverter and the devices outside the inverter net-
work.
Fig. 6-137: Setting of the default gateway address
Ethernet TCP disconnection time coefficient (Pr. 850)
When the inverter does not receive a packet within the time calculated by multiplying the Pr. 850 set-
ting by 8 in seconds from the devices with the TCP connection established, the connection will be for-
cibly closed.
Fig. 6-138: Setting of the Ethernet TCP disconnection time coefficient
6 - 286
* * * . * * * . * * * . * * *
* * * . * * * . * * * . * * *
* * * . * * * . * * * . * * *
Pr. 850 setting × 8
(seconds)
Time
Set the value in the first octet in Pr. 805.
Set the value in the second octet in Pr. 806.
Set the value in the third octet in Pr. 807.
Set the value in the fourth octet in Pr. 808.
Set the value in the first octet in Pr. 809.
Set the value in the second octet in Pr. 810.
Set the value in the third octet in Pr. 811.
Set the value in the fourth octet in Pr. 812.
Set the value in the first octet in Pr. 442.
Set the value in the second octet in Pr. 443.
Set the value in the third octet in Pr. 444.
Set the value in the fourth octet in Pr. 445.
Inverter
Normal communication
Timeout
(connection close)
Parameter
I003108E
I003108E
I003108E
Connected device
I004012E