Twisted Pair Port Leds On Poe Pse Switches; Figure 11: Twisted Pair Port Leds On The Poe Pse Switches; Table 5: Twisted Pair Port Leds On The Poe Pse Switches - Allied Telesis IE340 Series Installation Manual

Twisted Pair Port
LEDs on PoE
PSE Switches
45
The twisted pair ports on the IE340 PoE PSE switches have two LEDs
each. The LEDs are identified in Figure 11.
PoE LED
L/A LED
PoE LED
L/A LED
Figure 11. Twisted Pair Port LEDs on the PoE PSE Switches
The states of the LEDs are defined in Table 5.
Table 5. Twisted Pair Port LEDs on the PoE PSE Switches
LED State
Solid Green
Solid Amber
Flashing
Amber
PoE
Off
Description
The port is delivering power to a powered device.
The port is connected to a powered device but the
switch has shutdown PoE on it because of a fault
condition.
The port is connected to a powered device but is
not delivering power to it because the switch does
not have sufficient unused power.
This LED state can result from the following
conditions:
- The port is connected to a non-PoE device.
- The PD is powered off.
- The port is disabled in the management software.
- PoE is disabled on the port.
Chapter 1: Overview
PoE LED
L/A LED
PoE LED
L/A LED