Twisted Pair Port Leds; Figure 10: Twisted Pair Port Leds On The At-Ie200-6Ft And At-Ie200-6Gt Switches; Table 7: Twisted Pair Port Leds On The At-Ie200-6Ft Switch - Allied Telesis IE200 Series Installation Manual

Industrial ethernet switches
Hide thumbs Also See for IE200 Series:
Table of Contents

Advertisement

Chapter 1: Overview
Twisted Pair Port
LEDs
42
Table 6. Status LEDs (Continued)
LED
State
Solid Green
PWR2
Off
Solid Green
The twisted pair ports on the AT-IE200-6FT and AT-IE200-6GT Switches
have two LEDs each. The LEDs are identified in Figure 10.
Duplex mode LED
Speed and activity
Figure 10. Twisted Pair Port LEDs on the AT-IE200-6FT and AT-IE200-
The states of the LEDs on the twisted pair ports on the AT-IE200-6FT
Switch are defined in Table 7.
Table 7. Twisted Pair Port LEDs on the AT-IE200-6FT Switch
LED
State
Solid Green
Duplex
Solid Amber
Mode
Off
Description
The switch is receiving power on the PWR 1
connector and is operating normally.
The switch is not receiving power on the
PWR 2 connector or the input power from
the DC power supply is outside the normal
operating range of the unit.
The switch is receiving power on the PWR 2
connector and is operating normally.
6GT Switches
Description
The port is operating in full duplex mode.
The port is operating in half duplex mode.
The port has not established a link with a
network device.

Advertisement

Table of Contents
loading

This manual is also suitable for:

At-ie200-6ftAt-ie200-6fpAt-ie200-6gtAt-ie200-6gp

Table of Contents