Table of Contents
Advertisement
Do not use equipment in humid or explosive environment.
Only used indoors. The T3DSO2000-LS is designed to be used indoors and should only
be operated in a clean, dry environment.
Do not use the equipment when you suspect a problem. Do not use the T3DSO2000-LS if
the T3DSO2000-LS or any parts are damaged. Maintenance work shall be performed
by maintenance personnel with appropriate qualifications.
Keep the product surface clean and dry.
T3DSO2000A-MSO Option
The software option adds the following functions to the oscilloscope:
•
Digital channel acquisition and analysis - Acquire and analyze the signals connected
to the digital logic probe, including waveform display, save, parameter measurement,
etc.
•
Trigger on a digital channel - Trigger with the digital channel as the trigger source,
isolating events of interest.
•
Decode on a digital channel - Serial protocol decoding of a digital channel requires the
installation of the serial decode option.
13.2 Enable/Disable the Digital Channels
Turning on or off the digital channels is similar to analog channels. Digital data can be
stored as waveform files. Horizontal cursors and most of the horizontal measurements
also apply to digital waveforms.
1.800.561.8187
www.
.com
information@itm.com
T3DSO2000A Manual. Page 37
Advertisement
Table of Contents
