Table of Contents
Advertisement
30.4 Language
The T3DSO2000A supports multiple languages, including: Simplified Chinese,
Traditional Chinese, English, French, Japanese, German, Spanish, Russian, Italian and
Portuguese.
Operate Utility>System Setting>Language, and select the language in the list.
30.5 Screen Saver
The screen saver will be activated if the oscilloscope has not been operated for a set
period of time. At this time the backlight of the display is cut off to save power
consumption.
Operate Utility>System Setting>Screen Saver to specify the period before screen saver,
or select "Off" to disable the screen saver.
Any action from the mouse, touch screen or front panel can disable the screen saver.
30.6 I/O Setting
30.6.1 LAN
Operate the following steps to set the LAN port:
Perform Utility>System Setting>I/O Setting>LAN Config to open the LAN Config dialog
box.
A. Check Automatic (DHCP) to enable dynamic
IP. In this case, the oscilloscope must be
connected to the local area network with a
DHCP server. Contact your network
administrator to confirm the relevant
information.
B. When is not checked, the oscilloscope uses
static IP. Set the static IP address, subnet
mask, and gateway separately.
C. MAC address of the oscilloscope, read only.
1.800.561.8187
www.
.com
information@itm.com
T3DSO2000A Manual. Page 187
Advertisement
Table of Contents
