Table of Contents
Advertisement
28 Arbitrary Waveform Generator
28.1 Overview
The T3DSO2000A supports a built-in arbitrary waveform/function generator as standard.
The AWG functions include:
•
6 basic waveforms: Sine, Square, Ramp, Pulse, Noise, and DC
•
45 built-in and 2 custom arbitrary waveforms
•
Output frequency up to 50 MHz
•
-3 V - +3 V output amplitude range
Refer to the datasheet for the detailed specifications of the AWG.
Press the WaveGen button on the front panel, or touch the menu Utility>AWG Menu to
recall the AWG dialog box.
A. Turn on/off the output of AWG
B. Select the waveform type (Sine, Square, Ramp, Pulse, Noise,
DC and Arb)
C. Set the frequency
D. Set the amplitude
E. Set the offset
F. Other AWG settings: output load, overvoltage protection and so
on.
28.2 Output
For safety, pressing the Wave Gen button does not automatically
turn on the output of AWG. To turn on the output, touch Output in
the AWG dialog box after pressing Wave Gen. When the output is
enabled, the Wave Gen button lights up.
28.3 Wave Type
The AWG function provides six standard waveforms and multiple arbitrary waveforms.
The standard waveforms are Sine, Square, Ramp, Pulse, Noise, and DC.
1.800.561.8187
www.
.com
information@itm.com
T3DSO2000A Manual. Page 175
Advertisement
Table of Contents
