Table of Contents
Advertisement
30.12 Default
Pressing the Default button on the front panel has an equivalent effect.
30.13 Power online
Operate Utility>Power on Line to set. See the chapter "Power on" for details.
30.14 Debug
This function is used for the internal development of Teledyne Test Tools engineering and
has no user purpose.
31 Remote Control
The T3DSO2000A provides a LAN port and a USB Device port which can be used for
remote control in multiple ways.
31.1 Web Browser
A built-in web server provides an approach to control the oscilloscope by a web browser.
It doesn't require any additional software to be installed on the controlling computer. Set
the LAN port correctly (see section " LAN" for details), input the IP address of the
oscilloscope in the browser address bar, and then the user can browse and control the
oscilloscope in the web.
Insert Web Interface Picture Here.
A. Input the IP address of the instrument.
B. Instrument Information
C. Click here to recall the instrument control interface
1.800.561.8187
information@itm.com
www.
.com
T3DSO2000A Manual. Page 194
Advertisement
Table of Contents
