17.2 Select and Move Cursors
The cursors can be selected and moved directly by gestures and the universal
knob on the front panel, in addition, they can be selected in the cursors dialog box.
Gestures
Directly touch the cursor and drag it, as shown below:
Touch the display area of △X (or △Y) in M1 mode and drag it to move the two
cursors simultaneously, as shown in the figure below. This is equivalent to the
operation on the cursor type X1-X2 or Y1-Y2.
1.800.561.8187
information@itm.com
www.
.com
T3DSO2000A Manual. Page 105