Introduction; Calibration; First Steps; Delivery Checklist - Teledyne LeCroy T3DSO2000A Series User Manual

1 Introduction

This user manual includes important safety and installation information related to
the T3DSO2000A series oscilloscopes and includes simple tutorials for basic
operation of the oscilloscope.
The series includes the following
models:
Model
T3DSO2104A
T3DSO2204A
T3DSO2354A
T3DSO2502A

Calibration

The recommended calibration interval is one year. Calibration should only be
performed by qualified personnel.

2 First steps

2.1 Delivery Checklist

First, verify that all items listed on the packing list have been delivered. If you note any
omissions or damage, please contact your nearest Teledyne Test Tools customer
service center or distributor as soon as possible. If you fail to contact us immediately in
case of omission or damage, we will not be responsible for replacement.

2.2 Quality Assurance

The oscilloscope has a 3-year warranty (1-year warranty for probes) from the date of
shipment, during normal use and operation. Teledyne Test Tools can repair or replace
any product that is returned to the authorized service center during the warranty period.
We must first examine the product to make sure that the defect is caused by the
process or material, not by abuse, negligence, accident, abnormal conditions or
operation. Teledyne Test Tools shall not be responsible for any defect, damage, or
failure caused by any of the following:
a) Attempted repairs or installations by personnel other than Teledyne Test Tools.
b) Connection to incompatible devices/incorrect connection.
1.800.561.8187
Analog Bandwidth
100 MHz bandwidth, 4-channel, 2
GSa/s Sample rate
200 MHz bandwidth, 4-channel, 2
GSa/s Sample rate
350 MHz bandwidth, 4-channel, 2
GSa/s Sample rate
500 MHz bandwidth, 2-channel, 2
GSa/s Sample rate
www. .com
information@itm.com
T3DSO2000A Manual. Page 9