Descriptor Box; Shortcut Button On The Front Panel - Teledyne LeCroy T3DSO2000A Series User Manual

For example, to open the trigger setup dialog box, you can follow the
steps below:

10.2 Descriptor Box

For setup of channels, math, ref, timebase and trigger, there are dialog boxes at the
bottom of the display. For the introduction of the descriptor box, see sections
"Channel Descriptor Box" and "Timebase and Trigger Descriptor Box".
For the example above, touch the trigger descriptor box and the
trigger setup dialog box will be activated.

10.3 Shortcut Button on the Front panel

Most of the functions of the oscilloscope can be recalled directly by the shortcut
buttons on the front panel. See the chapter "Front Panel" for details.
To open the trigger setup dialog box, press the Setup button in the
trigger control area on the front panel.
1.800.561.8187
Trigger>Menu
The operations can be completed either by touch or by
mouse clicks.
www. .com
information@itm.com
T3DSO2000A Manual. Page 30