Table of Contents
Advertisement
18.6 Measurement Statistics
Enable the Statistics function to observe the distribution of the measured values of every
selected parameter.
•
Value – The current measurement
•
Mean – Average of all historical measurements
•
Min – The minimum of all historical measurements
•
Max – The maximum of all historical measurements
•
Stdev – Standard deviation of all historical measurements
•
Count – The number of historical measurements
Press the Clear Sweeps button or touch Reset Statistics in the measure dialog box, or
touch the symbol in the statistics display area to clear and restart statistics.
18.7 Statistics Histogram
After enabling statistics on a selected measurement, you can also activate a statistical
histogram. The histogram appears at the bottom of the statistics area. This enables
users to quickly view the probability distribution of the measured parameters. The color
of the histogram is consistent with the measurement source (Channel 1 is yellow, etc.).
Touch the histogram area of a parameter to enlarge it for details. You can move the
large histogram window position around the display by dragging. Touch the histogram of
another parameter to switch to the corresponding enlarged histogram.
1.800.561.8187
www.
.com
information@itm.com
T3DSO2000A Manual. Page 117
Advertisement
Table of Contents
