Table of Contents
Advertisement
Trigger Level Line (Vertical) and Trigger Delay Indicator (Horizontal) show the trigger
position of the waveform.
Cursors show where measurement points have been set. Move the cursors to quickly
reposition the measurement point.
Channel Descriptor boxes include analog channels (C1 - C4), digital channels (D), math
(F1 - F2) and reference (Ref). They are located under the grid area, showing the
parameters of the corresponding traces. Touching the boxes creates a dialog box.
Timebase and Trigger Descriptor boxes show the parameters of the timebase and
trigger respectively. Touching the boxes creates a dialog box for the selected item.
The backlight of the display is adjustable. Follow the steps below to adjust the backlight:
Display＞Backlight
8.2 Menu Bar
Menu bar with drop-down menus lets you access set-up dialogs and other functions. All
functionality can be accessed through the menu bar. It is not necessary for common
operations. You can enter most menus by using the front panel or parameter description
labels instead of the menu bar. However, the following operations can only be accessed
through the menu bar:
Utility >Help
Acquire >Sequence
Acquire >XY Mode
Analysis >Mask Test
Analysis >Bode Plot
Analysis >Power Analysis
Analysis >Counter
1.800.561.8187
information@itm.com
www.
.com
T3DSO2000A Manual. Page 17
Advertisement
Table of Contents
