Table of Contents
Advertisement
23 Mask Test
23.1 Overview
Users can create masks and define the rule used to evaluate Pass/Fail operations. An
event violating the rule is defined as a failure and a pulse can be generated from the
"Aux Out" port on the back panel. This is very useful to find and quantify anomalies in
production tests or similar batch measurements. When Pass/Fail is enabled, the signal
output from the Aux Out is automatically switched to Pass/Fail pulse.
1.800.561.8187
information@itm.com
www.
.com
T3DSO2000A Manual. Page 141
Advertisement
Table of Contents
