Table of Contents
Advertisement
D. Reference dialog box, hidden in this figure
Press the Ref button on the front panel, or touch + in the descriptor box region and
select Ref to recall the ref dialog box.
A. Select the location of the reference (REFA / REFB / REFC /
REFD)
B. Select the source (C1~C4 and MATH)
C. Enable/disable Display of the reference waveform
D. Set the label text of the reference trace.
E. Save the specified waveform in to the specified location in
Adjust the Reference Waveform
Set the vertical position of the reference waveform by the offset
knob shared by Decode, Digital, Math, and Ref on the front
panel, and set the vertical scale of the reference waveform by the scale knob.
21 Search
The T3DSO2000A can search for the specified events in a frame. The location of
the qualifying events are indicated by white triangle indicators along the top of the
display. In YT mode or Roll mode with the acquisition stopped, up to 1000 events
are supported. In Roll mode with acquisition set to run, the number of search events
is unlimited. The waveform can be zoomed when the search function is enabled.
1.800.561.8187
information@itm.com
www.
.com
T3DSO2000A Manual. Page 134
Advertisement
Table of Contents
