Display - Teledyne LeCroy T3DSO2000A Series User Manual

A. Set the position of measurement items, and support 5 measurement items at most
B. Set the measurement source
C. Measurement parameter area. Touch each parameter area to activate the
measurement parameter. In the figure above, "UF" is activated.
D. Clear all measurements
E. Clear the current measurement
F. Close the measurement configuration window
For example, to add UF measurements for C2 and GM measurements for C3, follow
the steps below:
Measure>Position>Source>UF
Measure>Position>Source>GM

27 Display

Display settings include display type of waveform, color, persistence, grid type, trace
brightness, graticule brightness, etc.
Press the Display/Persist button, or touch the menu Display>Menu to recall the display
dialog box.
1.800.561.8187 information@itm.com
www. .com
T3DSO2000A Manual. Page 169