Horizontal And Acquisition Setup; Timebase Setup - Teledyne LeCroy T3DSO2000A Series User Manual

Input Signal
Sampling
Points
Digital Waveform

14 Horizontal and Acquisition Setup

14.1 Timebase Setup

The timebase setup is used to adjust the scale and offset of the X (horizontal) axis. This
setting applies to all analog, digital channels and all math traces except FFT.
Touch the timebase descriptor box, the quick menu of the timebase settings will pop up.
In the menu timebase (horizontal scale), delay and other parameters can be set.
1.800.561.8187
Threshold
The configurable logical level includes TTL, CMOS, LVCMOS 3.3V,
LVCMOS 2.5V and Custom.
The setting range of the custom threshold is -10.0V to + 10.0V.
www. .com
information@itm.com
T3DSO2000A Manual. Page 40