Care
Do not store or leave the instrument in direct sunshine for extended periods of time.
Note: To avoid damage to the instrument, please do not leave it in a corrosive
atmosphere.
Cleaning
Regularly perform the following steps to clean the instrument.
1. Disconnect the instrument from all power sources, then clean it with a soft, damp
cloth.
2. Remove loose dust on the outside of the instrument with a soft cloth. When
cleaning the LCD, take care to avoid scratching it.
Note: To avoid damage to the surface of the instrument, please do not
use any corrosive liquid or chemical cleanser. Make sure that the
instrument is completely dry before restarting it to avoid short circuit or
personal injury.
End-of-Life Handling
recycling of your Teledyne LeCroy product,
1.800.561.8187
The instrument is marked with this symbol to indicate that it
complies with the applicable European Union requirements to
Directives 2012/19/EU and 2013/56/EU on Waste Electrical
and Electronic Equipment (WEEE) and Batteries.
The product is subject to disposal and recycling regulations
that vary by country and region. Many countries prohibit the
disposal of waste electronic equipment in standard waste
recepticles. For more information about proper disposal and
www.
.com
!
information@itm.com
T3DSO2000A Manual. Page V