Table of Contents
Advertisement
Let's use the operation of setting the "deskew" of a channel as an example: If the
expected value is 65 ns, input "65" on the virtual keypad, and then choose the unit n to
complete the operation. On the virtual keypad, touching the button Max, Min, and Default
quickly set the parameter to its maximum, minimum and default values.
Hide Dialog Box
When the dialog box is opened, the grid area will be compressed horizontally to display
the complete waveform. After setting the parameters, in order to achieve the best
waveform display effect, you can touch the title bar in the upper right corner to hide the
dialog box. Touching it again can open the dialog box.
8.7 Touch Gestures
Waveforms, cursors and trigger levels can be adjusted and rectangular zone can be
drawn by touch gestures in the grid area.
Drag the waveform left and right to
move it on the horizontal axis
1.800.561.8187
Pinch and spread the waveform
horizontally to re-scale the timebase
www.
.com
information@itm.com
T3DSO2000A Manual. Page 23
Advertisement
Table of Contents
