In the list view:
•
Time — The horizontal offset of the current data frame head relative to the trigger
position.
•
ID — ID of the frame.
•
Data length — Data length.
•
ID Parity — ID parity check.
•
Data — Data values.
•
Checksum — Data checksum.
16.7 FlexRay Trigger and Serial Decode
This section covers triggering and decoding FlexRay signals. Please read the
following for more details: " FlexRay Signal Settings", " FlexRay Trigger" and "
FlexRay Serial Decode".
16.7.1 FlexRay Signal Settings
Connect the FlexRay signal to the oscilloscope, and then set the threshold level of
the signal. The process of specifying the source and threshold is similar to " I2C
Signal Settings".
1.800.561.8187
DYNE
TELEDYNE
NE
NE
DYNE
www.
.com
information@itm.com
T3DSO2000A Manual. Page 90