Table of Contents
Advertisement
•
+Area: Area of the waveform above zero
•
-Area: Area of the waveform below zero
•
Area: Area of the waveform
•
AbsArea: Absolute area of the waveform
•
Cycles: Number of cycles in a periodic waveform
•
Rising Edges: Number of rising edges in a waveform
•
Falling Edges: Number of falling edges in a waveform
•
Edges: Number of edges in a waveform
•
Ppulses: Number of positive pulses in a waveform
•
Npulses: Number of negative pulses in a waveform
18.3.4 Delay Measurement
Delay measurement measures the time difference between two channels. It includes 10
delay parameters:
Phase: Phase difference between two edges
•
FRFR：The time between the first rising edge of source A and the following first
rising edge of source B at the 50% crossing
•
FRFF：The time between the first rising edge of source A and the following first
falling edge of source B at the 50% crossing
•
FFFR：The time between the first falling edge of source A and the following first
rising edge of source B at the 50% crossing
•
FFFF：The time between the first falling edge of source A and the following first
falling edge of source B at the 50% crossing
1.800.561.8187
www.
.com
information@itm.com
T3DSO2000A Manual. Page 114
Advertisement
Table of Contents
