Table of Contents
Advertisement
A. Digital channel waveform display, which shares the same grid area with the analog
channels.
B. Digital channel descriptor box
C. Dialog box
D. Digital channel indicators. Up to 16 digital channels are organized in two groups with
different thresholds: D15~D8 and D7~D0. Every channel can be turned on or off
individually.
E. Labels can be set to data, address or custom characters.
From the Front Pane
Press the Digital button on the front panel to turn on digital channels and display the
waveforms. Press again to turn off.
From the Touch Screen
Click + at the bottom of the display and select the "Digital" to turn on; click the digital
channel descriptor box, and clicking Off on the pop-up menu to turn off. Refer to the
operation in the chapter "Vertical Setup" for details.
13.3 Digital Channel Setup
Touch the digital descriptor box, then the quick menu of digital channel settings pops up
above the descriptor box. In the menu height and position of digital channels can be set:
1.800.561.8187
l
A. Upper position limit of the digital channel display
area. You can use the universal knob or virtual
keypad to set it. Decrease the height to provide
more adjustment area.
B. ▲ to increase position and ▼ to decrease the
channel location.
C. Reset the position to default value
D. The range in height of the digital channels display
area. You can use the universal knob or virtual
keypad to set it. If the display height covers all of
the available divisions, there will not be room to
adjust the position.
E. ▲ to increase and ▼ to decrease the number of
divisions occupied by the digital channels
www.
.com
information@itm.com
T3DSO2000A Manual. Page 38
Advertisement
Table of Contents
