Table of Contents
Advertisement
16.10 MIL-STD-1553B Trigger and Serial Decode
This section covers triggering and decoding MIL-Standard 1553B signals. Please read
the following for more details: " MIL-STD-1553B Signal Settings" and " MIL-STD-1553B
Serial Decode".
16.10.1 MIL-STD-1553B Signal Settings
Connect the MIL-STD-1553B signal to the oscilloscope, set the mapping relation
between channels and signals, and then set the threshold level of each signal. The
process of specifying the source and threshold is similar to " I2C Signal Settings"
16.10.2 MIL-STD-1553B Serial Decode
The configuration of MIL-STD-1553B decoding is similar to that of I2C decoding.
On the bus:
•
C/S the Command/Status word is displayed in green.
•
RTA the RT address is displayed in the frame and displayed in light yellow.
•
C/S Data is displayed in the frame and is displayed in white.
•
The data word is displayed in yellow and the data is displayed in the frame and
displayed in white.
•
Check Code is displayed in the frame and displayed in blue.
1.800.561.8187
www.
.com
information@itm.com
T3DSO2000A Manual. Page 98
Advertisement
Table of Contents
